Completing The Installation - IBM System x3300 M4 Installation And Service Manual

8. Return the retention latch to the locked position by pulling it away from the
If you have other devices to install or remove, do so now. Otherwise, go to

"Completing the installation."

Completing the installation
To complete the installation, complete the following steps:
1. If you removed the fan assembly, reinstall it (see "Installing the fan assembly"
2. If you removed the air baffle, reinstall it (see "Replacing the air baffle" on page
3. If you removed the left sidecover, replace it (see "Installing the left-side cover"
4. Reconnect the cables and power cords (see "Connecting the cables" on page
5. Update the server configuration (see "Updating the server configuration" on
6. Install the server in the rack cabinet (see the Tower to Rack Installation
7. Slide the server back into the rack, if necessary.
8. Start the server. Confirm that is starts correctly and recognizes the newly
9. Complete the additional steps in "Instructions for IBM Business Partners" on
104
System x3300 M4 Type 7382: Installation and Service Guide
system board.
on page 105
336).
on page 108).
108).
page 109).
Instructions that is included in the separately ordered rack package) if necessary.
installed devices, and make sure that no error LEDs are lit.
page 28.