IBM System x3300 M4 Installation And Service Manual page 232

Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000012-00000000 Remote access
attempt failed.
Invalid userid or
password received.
Userid is '%1' from
WEB browser at IP
address %2.(%1 =
user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000013-00000000 Remote access
attempt failed.
Invalid userid or
password received.
Userid is '%1' from
TELNET client at IP
address %2.(%1 =
user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000014-00000000 The [arg1] on system
[arg2] cleared by
user [arg3].
40000015-00000000 IMM reset was
initiated by user
%1.(%1 = user ID)
40000016-00000000 ENET[0]
DHCP-HSTN=%1,
DN=%2, IP@=%3,
SN=%4, GW@=%5,
DNS1@=%6.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_DNSProtocolEndpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.IPv4Address;
%4 =
CIM_IPProtocolEndpoint.SubnetMask;
%5 = IP address,
xxx.xxx.xxx.xxx; %6 =
IP address,
xxx.xxx.xxx.xxx)
214
System x3300 M4 Type 7382: Installation and Service Guide
Error A user has
attempted to log in
from a web
browser by using
an invalid login ID
or password.
Error A user has
attempted to log in
from a Telnet
session by using an
invalid login ID or
password.
Info The specified user
has deleted system
log events or audit
log events.
Info The Integrated
Management
Module has been
reset. The logs
provide additional
details.
Info The DHCP server
has assigned an
IMM IP address
and configuration.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator reset
the login ID or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator reset
the login ID or password.
No action; information only.
No action; information only.
No action; information only.