IBM System x3300 M4 Installation And Service Manual page 229

Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000002-00000000 Certificate Authority
[arg1] has detected a
[arg2] Certificate
Error.
40000003-00000000 Ethernet Data Rate
modified from [arg1]
to [arg2] by user
[arg3].
40000004-00000000 Ethernet Duplex
setting modified
from [arg1] to [arg2]
by user [arg3].
40000005-00000000 Ethernet MTU
setting modified
from [arg1] to [arg2]
by user [arg3].
Error A problem has
occurred with the
SSL Server, SSL
Client, or SSL
Trusted CA
certificate that has
been imported into
the IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated by the
Generate a New
Key and
Certificate Signing
Request link.
Info The specified user
has changed the
Ethernet data rate
of the Integrated
Management
Module external
network interface
to the specified
value.
Info The specified user
has changed the
Ethernet duplex
setting of the
Integrated
Management
Module external
network interface
to the specified
value.
Info The specified user
has changed the
Ethernet maximum
transmission unit
(MTU) setting of
the Integrated
Management
Module external
network interface
to the specified
value.
1. Make sure that the certificate that
you are importing is correct and
correctly generated.
2. Try importing the certificate again.
No action; information only.
No action; information only.
No action; information only.
Chapter 4. Troubleshooting
211