IBM System x3300 M4 Installation And Service Manual page 98

v The following table lists the option part numbers and CRU part numbers for the
80
System x3300 M4 Type 7382: Installation and Service Guide
PCI-e slots on the riser-card and the system board, the microprocessor to which
each slot is connected, and the supported adapters that you can install in each
slot:
Table 12. PCI riser slots supported configurations
PCI-X riser-card PCI-e slot
assembly number
1 1
1 2
2 3
Note: PCI-e slot 3 on PCI-X riser-card assembly 2 is reserved for an optional internal RAID
adapter. Do not install any internal RAID adapter in PCI riser-card assembly 1.
Note: While installing 16 GB 1.5 Volt/ 32 GB 1.35 Volt, please refers to the table
of fan configuration instruction.
Table 13. Fan Configuration Instruction
Fans Conditions
2 and Standard for all systems
Rear
fan
3
1. When the second microprocessor is populated, the fan is included in the
second microprocessor kit, P/N: 00D2581 ~ 00D2589. Or
2. When more than 2 PCI-e adapters have been installed on the system, the fan
(P/N: 00D2593) will be available separately.
1 Optional redundant fan (P/N: 00D2593)
Attention: When fan 3 is installed and 16 GB 1.5V / 32 GB 1.35V DIMMs are
installed, fan 1 must also be populated.
network adapters.
Table 14. Network adapters
Description
QLogic 4Gb PCIe FC single-port HBA
QLogic 4Gb PCIe FC dual-port HBA
NetXtreme II 1000 express Ethernet adapter
Microprocessor
to which the
slot is connected Configuration 1
Microprocessor 1 PCI-e Gen2 x16
(x16
mechanically)
full-height,
half-length
adapter
Microprocessor 1 N/A
Microprocessor 1 PCI-e Gen2 x4
low-profile,
internal RAID
adapter
Network Adapters
Configuration 2
PCI-e Gen2 x8
(x16
mechanically)
full-height,
half-length
adapter
PCI-e Gen2 x8
(x16
mechanically)
low-profile
adapter
PCI-e Gen2 x4
low-profile,
internal RAID
adapter
Option part CRU part
number number
39R6525 39R6526
39R6527 39R6528
39Y6066 39Y6070