IBM System x3300 M4 Installation And Service Manual page 245

Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000081-00000000 PXE boot requested
by user [arg1].
40000082-00000000 The measured power
value has returned
below the power cap
value.
40000083-00000000 The new minimum
power cap value has
returned below the
power cap value.
40000084-00000000 IMM firmware
mismatch between
nodes [arg1] and
[arg2]. Please
attempt to flash the
IMM firmware to the
same level on all
nodes.
40000085-00000000 FPGA firmware
mismatch between
nodes [arg1] and
[arg2]. Please
attempt to flash the
FPGA firmware to
the same level on all
nodes.
40000086-00000000 Test Call Home
Generated by user
[arg1].
40000087-00000000 Manual Call Home
by user [arg1]:
[arg2].
40000088-00000000 Management
Controller [arg1]:
Configuration
restoration from a
file by user [arg2]
completed.
40000089-00000000 Management
Controller [arg1]:
Configuration
restoration from a
file by user [arg2]
failed to complete.
Info PXE boot
requested.
Info Power exceeded
cap recovered.
Info Minimum Power
Cap exceeds Power
Cap recovered
Info A mismatch of
IMM firmware has
been detected
between nodes.
Error A mismatch of
FPGA firmware
has been detected
between nodes.
Info Test Call Home
generated by user.
Info Manual Call Home
by user.
Info This message is for
the use case where
a user restores a
Management
Controller
configuration from
a file and it
completes.
Info This message is for
the use case where
a user restores a
Management
Controller
configuration from
a file and the
restoration fails to
complete.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
Chapter 4. Troubleshooting
227