IBM System x3300 M4 Installation And Service Manual page 233

Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000017-00000000 ENET[0]
IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3,
GW@=%4.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_StaticIPSettingData.IPv4Address;
%3 =
CIM_StaticIPSettingData.SubnetMask;
%4 =
CIM_StaticIPSettingData.DefaultGatewayAddress)
40000018-00000000 LAN: Ethernet[0]
interface is no longer
active.
40000019-00000000 LAN: Ethernet[0]
interface is now
active.
4000001a-00000000 DHCP setting
changed to [arg1] by
user [arg2].
4000001b-00000000 Management
Controller [arg1]:
Configuration
restored from a file
by user [arg2].
Info An IMM IP
address and
configuration have
been assigned
using client data.
Info The IMM Ethernet
interface has been
disabled.
Info The IMM Ethernet
interface has been
enabled.
Info The specified user
has changed the
DHCP setting of
the Integrated
Management
Module external
network interface.
Info The specified user
has restored the
Integrated
Management
Module (IMM)
configuration from
a previously saved
configuration file.
Some configuration
settings might
require that the
IMM be restarted
before they take
effect.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
Chapter 4. Troubleshooting
215