Browse Session Table; Igmp Snooping Group - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Browse Session Table

This window displays the management sessions since the Switch was last rebooted.
To view the Browse Session Table window, click Monitoring > Browse Session Table.

IGMP Snooping Group

This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read
the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
The number of IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group window, click Monitoring > IGMP Snooping Group.
The user may search the IGMP Snooping Group Table by VID by entering it in the top left hand corner and clicking
Find.
The following field can be viewed:
Parameter
VLAN Name
Multicast Group
MAC Address
Reports
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and
select IGMP Snooping > IGMP Snooping Settings.
Figure 11- 2 . Browse Session Table window
Figure 11- 29. IGMP Snooping Group window
Description
The VLAN ID of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
8
231