Command Line Reference
Flash/File Commands
9-50
Flash/File Commands
These commands are used to manage the system software or configuration
files.
Command
Function
copy <ftp | scp |
Copy data from a remote server onto the device.
tftp> <flash |
startup-config>
<ip> <file> [user-
name <user>
password <pass>]
copy startup-config
Copy the startup configuration file from the device to
<ftp | scp | tftp>
the specified remote server.
<flash | startup-
config> <ip> <file>
[user-name <user>
password <pass>]
copy factory-
Reset a configuration file to the factory-default
default <startup-
configuration on the device.
config | custom-
default>
copy running-
Reset a configuration file to the running configuration
config<startup-
on the device.
config | custom-
default>
erase
Reset the specified configuration file stored on the
device.
write
View or save the running configuration of the device.
show config
Display the startup configuration on the device.
show copy
Display the status of the last copy operation.
show tech
Display the technical support output.
show custom-
Display the customer-modified version of the factory-
default
default configuration.
show running-
Display the running configuration of the device.
config
Mode Page
MC
9-53
MC
9-53
MC
9-53
MC
9-53
MC
9-54
MC
9-55
MC
9-56
MC
9-57
MC
9-57
MC
9-58
MC
9-60