HP 530 Management Manual page 323

• custom-default -Shows custom default configuration file of device. See
"show custom-default" on page 9-58.
debug - Shows debug-related information on this device. See
•
debug" on page 9-33.
• detected-ap - Shows detected neighboring wireless network details.
See
"show detected-ap" on page 9-140.
filters - Shows settings for traffic/security filters on this device. See
•
"show filters" on page 9-89.
interfaces - Shows information about the interfaces on this device. See
•
"show interface" on page 9-98.
• ip - Shows the current IP configuration on this device. See
page 9-97.
lldp - Shows Link Layer Discovery Protocol (LLDP) details. See
•
lldp" on page 9-49.
logging - Shows all the entries in the event log. See
•
page 9-33.
• mac-auth-local - Show all the entries in the local MAC address authen-
tication control lists. See
qos - Shows QoS details on this device and wireless system. See
•
qos" on page 9-156.
• radios - Shows information about the radio(s) on this device. See
radio" on page 9-117.
radius-local - Shows status of the internal RADIUS server on device.
•
See
"show radius-local" on page 9-70.
running-config - Shows the running configuration file of this device.
•
See "show running-config" on page 9-60.
• snmp-server - Shows SNMP community and trap information. See
"show snmp-server" on page 9-45.
sntp - Shows configured time protocol and servers on this device. See
•
"show sntp" on page 9-36.
ssh - Shows SSH configuration and the status of active connections.
•
See "show ssh" on page 9-27.
• ssid - Shows SSID information on this device or radio context. See
"show ssid" on page 9-118.
stations - Show associated wireless station details. See
•
on page 9-123.
supported-rate - Show information about supported transmission rates
•
on this device. See
"show mac-auth-local" on page 9-74.
"show supported-rate" on page 9-124.
Command Line Reference
General Commands
"show
"show ip" on
"show
"show logging" on
"show
"show
"show stations"
9-15