Wireless Security Commands - HP 530 Management Manual

Wireless Security Commands

The commands described in this section configure parameters for wireless
security on SSID interfaces.
Command
security <no-security | static-
wep | dynamic wep | wpa-psk |
wpa-8021x>
wep-default-key <1| 2| 3| 4>
[no] wep-key ascii
wep-key-length <64|128>
wep-key-<1| 2| 3| 4> <key>
[no] open-system-
authentication
[no] shared-key authentication Enables or disables shared-key
wpa2-
[no] wpa-allowed | [no]
allowed
wpa-preshared-key <key>
wpa-cipher-tkip
wpa-cipher-aes
wpa-psk-ascii
wpa-psk-hex
rsn-preauthentication
Function
Enables the type of security suite on a
SSID interface.
Defines the key index if using the
static-wep security.
Sets the wep key to an ascii format.
Sets the wep-key-length to either 64 or
128 bits if using the static-wep
security.
Defines the up to four security keys, if
using the static-wep security.
Enables or disables open-system
authentication for SSID association.
authentication for SSID association.
Enables or disables wireless stations
to use the original WPA and WPA2 on
this WLAN.
Defines a WPA preshared key.
Enables TKIP for WPA on this WLAN.
Enables the Advanced Encryption
Algorithm (AES) for WPA on this
WLAN.
Enables ASCII shared key.
Enables hex shared key.
Enables WPA2 stations to pre-
authenticate on this WLAN.
Command Line Reference
Wireless Security Commands
Mode Page
IC-W-S 9-126
IC-W-S 9-128
IC-W-S 9-129
IC-W-S 9-130
IC-W-S 9-130
IC-W-S 9-131
IC-W-S 9-132
IC-W-S 9-132
IC-W-S 9-133
IC-W-S 9-134
IC-W-S 9-134
IC-W-S 9-134
IC-W-S 9-134
IC-W-S 9-136
9-125