Antenna; Antenna Mode - HP 530 Management Manual

Command Line Reference
Wireless Interface Commands
9-106
Radio Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# mode g
ProCurve Access Point 530(radio1)#

antenna

This command configures which antenna to use with this radio.
Syntax
antenna <external | internal>
external - Use the external antenna sockets on the AP (for external
•
antenna).
• internal - Use the internal (built-in) antenna(s).
Default Setting
internal
Command Mode
Radio Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# antenna external
ProCurve Access Point 530(radio1)#

antenna mode

This command sets the antenna diversity mode on this radio. These settings
only have an effect if the external antenna configuration is used.
Syntax
antenna mode <diversity | single>
diversity - Diversity (2 connections/elements) antenna system.
•