Show Snmp; Flash/File Commands - HP procurve 420 Management And Configuration Manual

Command Line Reference

Flash/File Commands

6-30

show snmp

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
HP420#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
HP420#

Flash/File Commands

These commands are used to manage the system software or configuration
files.
Command Function
bootfile Specifies the software file used to start up the system Exec
copy Copies a software or configuration file between flash
memory and a FTP/TFTP server
delete Deletes a software or configuration file
dir Displays a list of files in flash memory
Mode Page
6-31
Exec 6-31
Exec 6-33
Exec 6-33