Web-Auth (Global Guest User) - HP 530 Management Manual

Example
ProCurve Access Point 530(config)# web-auth starting-ip-
address 192.168.0.1 255.255.240.0
ProCurve Access Point 530(config)# web-auth lease-time 60
ProCurve Access Point 530(config)#
Temporary Address Pool Start
Subnet
Lease time (secs.)
Guest Username
Guest Password
ProCurve Access Point 530(config)#

web-auth (Global Guest User)

These commands configure the global Guest credentials used by Web-Auth on
the device. The no version of the command clears the saved value.
Syntax
[no] web-auth guest-username <username>
[no] web-auth guest-password <password>
• username - Specifies the username used for all Guest users.
password - Specifies the password used for all Guest users.
•
Command Mode
Global Configuration
Example
ProCurve Access Point 530(config)# web-auth guest-username
lbg_guest
ProCurve Access Point 530(config)# web-auth guest-password
lbg_password
ProCurve Access Point 530(config)#
Temporary Address Pool Start
Subnet
Lease time (secs.)
Guest Username
Guest Username
ProCurve Access Point 530(config)#
Command Line Reference
Web Authentication Commands
show web-auth
192.168.0.1
255.255.240.0
60
lbg_guest
lbgpassword
show web-auth
192.168.0.1
255.255.240.0
60
lbg_guest
lbg_password
9-81