HP 530 Management Manual page 236

Wireless Security Configuration
Configuring RADIUS Client Authentication
7-42
The following example first sets the radius-local username to "chris" and
subsequently sets the password for the chris user account to "chrisopen".
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radius-local chris
realname csmith
ProCurve Access Point 530(config)# radius-local chris
password chrisopen
ProCurve Access Point 530(config)#
To display the current local RADIUS servers from the Manager Exec level, use
the show radius-local command, as shown in the following example.
ProCurve Access Point 530# config
ProCurve Access Point 530(config)# show radius-local
Local-Radius User Accounts (wireless client authentication:
Username Real Name
---------- ---------- ----------
chris csmith
ProCurve Access Point 530(config)#
Status
Enabled