Show Ap-Authentication; Filtering Commands - HP 530 Management Manual

show ap-authentication

This command displays the current AP Authentication settings on the device.
Syntax

show ap-authentication

Default
none
Command Mode
Global Configuration
Example
ProCurve Access Point 530(config)# show ap-authentication
Status: Enabled
EAP Type: peap
ProCurve Access Point 530(config)#

Filtering Commands

The commands described in this section are used to filter communications
between wireless stations, control access to the management interface from
wireless stations, and filter traffic using specific Ethernet protocol types.
Command Function
[no] inter-station- Enables communication between wireless
blocking stations.
[no] wireless-mgmt- Enables communication between wireless
block stations.
show filters Display filter details.
Command Line Reference

Filtering Commands

Mode Page
GC 9-88
GC 9-88
MC 9-89
9-87