Cli: Configuring Global Guest Account Settings - HP 530 Management Manual

N o t e
ProCurve Access Point 530(config)# web-auth guest-username lbg_guest
ProCurve Access Point 530(config)# web-auth guest-password lbg_password
ProCurve Access Point 530(config)#
Temporary Address Pool Start
Subnet
Lease time (secs.)
Guest Username
Guest Username
ProCurve Access Point 530(config)#
N o t e
3. Enter the password to be assigned to all Guest users in the Password field.
Click [Update].
4.
The username and password used for the global Guest user account must also
be registered on the selected Web-Auth RADIUS server before Guest users can
be authenticated using Web-Auth.

CLI: Configuring Global Guest Account Settings

CLI Commands Used in This Section
Command Syntax
[no] web-auth guest-username
[no] web-auth guest-password
Configuring Guest user credentials on the access point. The following
example configures global Guest user credentials that will be assigned to Web-
Auth Guest users.
show web-auth
192.168.0.1
255.255.240.0
60
lbg_guest
lbg_password
The username and password for the global Guest User account must be
registered on the selected Web-Auth RADIUS server before guest users can
be authenticated using Web-Auth.
Web Authentication for Mobile Users
<username>
<password>
Wireless Security Configuration
CLI Reference Page
9-81
9-81
7-67