Buttons - HP 530 Management Manual

Command Line Reference
System Management Commands
9-22
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# password manager admin

buttons

This command enables the ability to clear the password(s) and/or configura-
tion(s) via the buttons on the device. The no command disables this ability.
Syntax
buttons <custom-reset | factory-reset | password-reset | system-reset>
custom-reset - Enables the ability to reset this device to the custom-
•
default configuration via the buttons. The no version of the command
disables this devices ability to reset this device to the custom-default
configuration via the buttons.
• factory-reset - Enables the ability to reset this device to the factory-
default configuration via the buttons. The no version of the command
disables this devices ability to reset this device to the factory-default
configuration via the buttons. The no buttons factory-reset command
will not work if the serial console is already disabled (e.g." no console"
has been executed).
password-reset - Enables the ability to reset the password(s) on this
•
device via the buttons. The no version of the command disables this
devices ability to reset the password(s) on this device via the buttons.
system-reset - Enables the ability to reset the system via the buttons.
•
The no version of the command disables this devices ability to reset
the system via the buttons.
Default Setting
Enabled
Command Mode
Global Configuration
Example