Cli: Enabling Radius Accounting Parameters - HP 530 Management Manual

General System Configuration
Configuring RADIUS Accounting
N o t e
5-54

CLI: Enabling RADIUS Accounting Parameters

CLI Commands Used in This Section
Command Syntax
[no] radius-accounting <primary | secondary> <ip
<ip> | port <port> | key <key>>
The following example shows how to enable RADIUS Accounting and set the
ip address, port number, and the secret key on the access point.
Enter radius commands, one per line.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radius-accounting primary
ip 192.168.1.52
ProCurve Access Point 530(config)# radius-accounting primary
port 161
ProCurve Access Point 530(config)# radius-accounting primary
key blue
ProCurve Access Point 530(config)#
CLI Reference Page
9-65