Web: Configuring Mac Address Authentication - HP 530 Management Manual

Wireless Security Configuration
Configuring MAC Address Authentication
N o t e
7-46
To Add a MAC Address to an Access Control List:
1. Select the ACL from the ACL List drop-down.
2. Enter the MAC address in the MAC Entry field.
3. Click [Add] to add the new address to the ACL address list.
To Remove a MAC Address from an Access Control List:
1. Select the ACL from the ACL List drop-down.
2. Select the MAC address by clicking on it in the ACL address list.
Click [Remove] to remove the address from the ACL address list.
3.

Web: Configuring MAC Address Authentication

The MAC Authentication tab shown in Figure 7-10 enables the WLAN (BSS/
SSID) interface to be configured to use MAC authentication.
You can modify these parameters:
■ MAC Authentication: Configures either the local or remote MAC
authentication on this access point. Selecting the Enabled option enables
access to the Local or Remote parameters.
■ Access Control List: Selects among preconfigured ACLs.
Policy: Allows or prohibits specified station addresses.
■
■ [Update]: Updates the WLAN (BSS/SSID) interface with the selected
MAC configuration.
Before activating MAC Authentication, you should create the related ACL. If
you have not created the ACL, see
"To Configure the Access Control List:" on page 7-45
.