HP 530 Management Manual page 157

N o t e
ProCurve Access Point 530(config)# show system-information
Serial Number
System Name
System Up Time
System Location
System Country Code
Software Version
Ethernet MAC Address
IP Address
Subnet Mask
Default Gateway
DHCP Client
Management VLAN ID
Untagged-VLAN ID
Radio 1 MAC Address
Radio 1 Status
Radio 2 MAC Address
Radio 2 Status
HTTP Interface
SSL Interface
SSH Interface
Telnet Interface
Serial Interface
ProCurve Access Point 530(config)#
You do not need to perform a system reboot to set the country code. Use the
write mem command to save the country code.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# country GB
ProCurve Access Point 530(config)# write mem
The following example shows how to use the show system-information
command to return the access point's current values, including the country
code.
TW633VV01D
HP-AP-200
13 mins 17 secs
2FS17
us
WA.02.00.0412
00:14:C2:A5:6A:B3
192.168.15.200
255.255.255.0
192.168.15.254
Disabled
1
1
00:14:C2:A7:11:A0
Enabled (802.11g)
00:14:C2:A7:E1:20
Enabled (802.11g)
Enabled
Enabled
Enabled
Enabled
Enabled
Wireless Interface Configuration
Setting the Country Code
6-5