HP 530 Management Manual page 80

Using the ProCurve Web Browser Interface
Tasks for Your First ProCurve Web Browser Interface Session
N o t e
4-30
To Set IP Parameters i:
1. Select Network Setup > Ethernet.
To set a dynamic connection, select DHCP in the Connection Type drop-
2.
down.
To set a manual connection, select Static IP in the Connection Type drop-
3.
down.
4. If you chose Static IP, enter the IP address and the subnet mask in the Static
IP Address and Subnet Mask fields. The defaults automatically populate.
5. If a management station exists on another network segment, in the Default
Gateway field enter the IP address of a gateway that can route traffic
between these segments.
6. Enter the IP address for the primary and secondary DNS servers to be used
for host-name to IP address resolution.
7. Optionally enter the domain suffix for hostname/domain-name lookups
in the Domain field.
8. Click to save these IP settings.
[Update]
If you change the IP address using the Web interface, you must log in again
using the new address.