Wep-Key-Ascii (Wds); Wep-Key-Length (Wds) - HP 530 Management Manual

Command Line Reference
Wireless Distribution System (WDS)
9-164
– If Key Length is 104 bits and Key Type is "Hex", then each WEP
Key must be 26 characters long.
Default Setting
None
Command Mode
WDS Interface Configuration
Example
ProCurve Access Point 530(wds1)# wep-key abcde
ProCurve Access Point 530(wds1)#

wep-key-ascii (wds)

This command sets the WDS WEP key type to ASCII when using static-wep
security. The no version of the command sets the key type to hexadecimal.
Syntax
wep-key-ascii
no wep-key-ascii
Default Setting
Enabled
Command Mode
WDS Interface Configuration
Example
ProCurve Access Point 530(wds1)# wep-key-ascii
ProCurve Access Point 530(wds1)#

wep-key-length (wds)

This command sets the WDS WEP key length when using static-wep security.
Syntax
wep-key-length <64|128>
• 64 - The 64 bit wep key length (with initializing vector, otherwise it is
40 bits).