HP 530 Management Manual page 487

Using the CLI to Copy and Reset Config Files. This example displays how
to reset the configuration file back to the factory-default configuration on the
device.
ProCurve Access Point 530#copy factory-default startup-
config
ProCurve Access Point 530#
This example shows how to reset by 'erasing' the specified configuration file
stored on the device.
ProCurve Access Point 530#erase custom-default
ProCurve Access Point 530#
This example displays how to copy the running configuration to a startup
configuration file on the device.
ProCurve Access Point 530#copy running-default startup-
config
ProCurve Access Point 530#
This example displays how to 'write' the running configuration to a startup
configuration file on the device.
ProCurve Access Point 530#write memory
ProCurve Access Point 530#
Using the CLI to Copy Config files to a Remote Server. This example
displays how to copy the startup configuration from the device to a remote
server (TFTP). If using this command for a FTP or STP server, you will need
to include the username and password for the server.
ProCurve Access Point 530#copy startup-config tftp
192.168.1.52 copystart
ProCurve Access Point 530#
File Uploads, Downloads, and Resets
Transferring Configuration Files
A-11