Snmp; Group Configuration - HP 530 Management Manual

Defaults

SNMP

B-6
SNMP
Command Default Settings
[no] snmp-server Restricted community with a public access
<comm> restricted default.
| unrestricted
snmp-server Contact
contact<contact>
[no] snmp-server Host Address: None
host Community String: public
<host><comm>
snmp-server port By default an SNMP agent only listens to
<port> requests from port 161. However, you can
configure this so the agent listens to requests
on another port.
snmp-server None
location <location>
snmpv3 Disabled
[no] lldp Enabled

Group Configuration

Command
group-config
Default Settings
Disabled
Mode Page
GC 9-38
GC 9-41
GC 9-40
GC 9-42
GC 9-41
GC 9-46
GC 9-48
Mode Page
GC 5-67