HP 530 Management Manual page 298

Special Features
Wireless Distribution System (WDS) and Spanning Tree Protocol (STP)
8-28
Using the CLI to View WDS Parameters. These examples use the show
interface ethernet command and the show wds x command to check the
status of the STP state and configured parameters.
ProCurve Access Point 530#show interface ethernet
Ethernet interface:
--------------------
Description
MAC address
Speed-duplex
Administrative status Enabled
Management VLAN ID
Untagged-VLAN ID
Spanning Tree (STP)
STP Port State
STP Hello Interval
STP Forward Delay
STP Bridge Priority
Bytes Rx
Packets Rx
Compressed Rx
Mcast packets Rx
Dropped Rx packets
FIFO overflows Rx
Frame errors Rx
Total Rx errors
ProCurve Access Point 530#
Ethernet
00:14:C2:A5:08:CB
auto
1 (U)
1
Enabled
forwarding
10.0
10
255
22911 Bytes Tx
240 Packets Tx
0 Compressed Tx
0 Carrier errors Tx
0 Dropped Tx packets
0 FIFO overflows Tx
0 Packet collisions Tx
0 Total Tx errors
46107
299
0
0
0
0
0
56