Qos Sta-Params - HP 530 Management Manual

Procurve wireless access point 530
Hide thumbs Also See for 530:
Table of Contents

Advertisement

qos sta-params

This command configures QoS related parameters on the device for the
wireless stations.
Syntax

qos sta-params

<voice|video|best-effort|background> {<[aifs <aifs>] [cwmin
<cwmin>] [cwmax <cwmax>] [txop-limit <txop-limit>]}
voice - High priority queue, minimum delay. Time-sensitive data such
as VoIP and streaming media are automatically sent to this queue.
video - High priority queue, minimum delay. Time-sensitive video data
is automatically sent to this queue.
best effort - Medium priority queue, medium throughput and delay.
Most traditional IP data is sent to this queue.
background - Lowest priority queue, high throughput. Bulk data that
requires maximum throughput and is not time-sensitive is sent to this
queue (FTP data, for example).
[aifs <aifs>] - Arbitration Inter-Frame Spacing (AIFS) specifies a wait
time in milliseconds for data frames. Valid values are: 1-255.
[cwmin <cwmin>] - Specifies the Minimum Contention Window QoS
parameter. The value specified is the lower limit (in milliseconds) of
a range from which the initial random backoff wait time is deter-
mined. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255,
511, or 1024. The value for "cwmin" must be lower than the value
for "cwmax".
[cwmax <cwmax>] - Specifies the Maximum Contention Window QoS
parameter. The value specified is the upper limit (in milliseconds) of
a range from which the initial random backoff wait time is deter-
mined. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255,
511, or 1024. The value for "cwmax" must be higher than the value
for "cwmin".
[txop-limit <txop-limit] - Specifies the Transmission Opportunity Limit
QoS parameter. This value specifies (in milliseconds) the Transmis-
sion Opportunity (TXOP) for client stations; that is, the interval of
time when a WMM client station has the right to initiate transmissions
on the wireless network. Valid values are 0.0 through 65535.
Default Setting: See tabled output.
Command Line Reference
QoS Commands
9-153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 530

Table of Contents