Vlan Commands; Vlan - HP 530 Management Manual

VLAN Commands

The VLAN commands supported by the access point are listed below.
Command

vlan

[no] untagged-vlan <vid>
management-vlan <vid>

vlan

This command configures the static VLAN-related settings for the ssid.
Syntax
vlan
Default Setting
None (Range: 1-4094)
Command Mode
WLAN Interface Configuration
Command Usage
• When dynamic VLANs are enabled on the access point, a VLAN ID (a
number between 1 and 4094) can be assigned to each client after
successful authentication using IEEE 802.1X and a central RADIUS
server. If a user does not have a configured VLAN ID, the access point
assigns the user to the default VLAN ID (a number between 1 and
4094) of the associated SSID interface.
Example
ProCurve Access Point 530(radio1-wlan1)# vlan 3
ProCurve Access Point 530(radio1-wlan1)#
Function
Configures the default VLAN for an
SSID interface.
Configure the global untagged VLAN
ID for the AP. The no version of the
command sets any untagged VLAN to
become tagged.
Configure the VLAN ID for the
management interfaces (Web UI,
SNMP, Telnet, etc.).
Command Line Reference

VLAN Commands

Mode Page
IC-R- 9-147
WLAN
GC 9-148
MC 9-148
9-147