Command Line Reference
Wireless Security Commands
9-132
shared-key-auth
This command enables shared-key authentication for associating with this
WLAN. The no version of the command disables shared-key authentication.
Syntax
shared-key-auth
no shared-key-auth
Default Setting
Disabled
Command Mode
WLAN Interface Configuration
Command Usage
•
Supported authentications are: open system, shared key, or both.
Example
ProCurve Access Point 530(radio1-wlan1)# shared-key-auth
ProCurve Access Point 530(radio1-wlan1)#
wpa-allowed | wpa2-allowed
Enables wireless stations to use the original WPA or WPA2 on this WLAN. The
no version of these commands disables stations from being able to use the
original WPA or WPA2 on this WLAN.
Syntax
wpa-allowed | wpa2-allowed
no wpa-allowed | no wpa2-allowed
Default Setting
Both enabled.
Command Mode
WLAN Interface Configuration