Show Debug; Show Logging - HP 530 Management Manual

Command Usage
The following examples show how to relay log entries to a syslog host on
port 514 at IP address 10.1.0.3.
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# logging 10.1.0.3 514
ProCurve Access Point 530(config)#
Related Commands
show logging (page 9-33)

show debug

This command displays debug related details on this device.
Syntax
show debug
Default Setting
N/A
Command Mode
Manager Exec
Global Configuration
Example
ProCurve Access Point 530# show debug
Debug Logging:
Syslog Relay 10.1.0.3 (port 514)
ProCurve Access Point 530#

show logging

This command displays all the entries in the event log on the device. This
command is functionally the same as the log command.
Syntax
Command Line Reference
System Logging Commands
9-33