Web: Configuring Access Control List - HP 530 Management Manual

Procurve wireless access point 530
Hide thumbs Also See for 530:
Table of Contents

Advertisement

Web: Configuring Access Control List

The Local MAC Authentication tab shown in Figure 7-9 enables you to create
and maintain access control lists (ACLs) that can be directly applied to each
WLAN for access control.
You can modify these parameters:
Access Control List: Selects among preconfigured ACLs.
[Remove]: Updates the WLAN (BSS/SSID) interface by removing (prohib-
iting) the selected MAC configuration.
MAC Address [Add]: Adds the entered MAC address to selected ACL list.
List Name: Specifies a new list name.
MAC Entry: Specifies the MAC address for the list.
New ACL [Add]: Adds the New ACL to the list of Access Control Lists.
Figure 7-9. Configuring an Access Control List
To Configure the Access Control List:
1.
Select Management> Local MAC Authentication tab.
2.
Enter the ACL name in the List Name field.
3.
Enter the MAC address in the MAC Entry field.
Click [Add] and the new list appears in the ACL List drop-down.
4.
Wireless Security Configuration
Configuring MAC Address Authentication
7-45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 530

Table of Contents