HP 530 Management Manual page 250

Wireless Security Configuration
Configuring 802.1X AP Authentication
7-56
Displaying the current AP Authentication status. Use the show system-
information command to check the current AP Authentication status of the
access point.
ProCurve Access Point 530(config)# show ap-authentication
AP Authentication Settings for the Access Point:
Status: Enabled
EAP Type: peap
ProCurve Access Point 530(config)#
Disabling AP Authentication on the access point. To remove AP
Authentication on the access point, use the no ap-authentication command
ProCurve Access Point 530(config)# no ap-authentication
ProCurve Access Point 530(config)#