Command Line Reference
Wireless Interface Commands
9-102
Command
fragmentation-thresh
inactivity-timeout
slot-time
rts-threshold
tx-power-reduction
enable
disable
show radio <radio>
show wlan <ssid_index>
show basic-rate
show stations
show supported-rate
radio
This command enters the wireless interface configuration mode for config-
uring parameters for the radio interface.
Syntax
radio <radio_name>
•
radio_name - The name used to identify the radio. I.E. 1, 2.
Default Setting
None
Command Mode
Function
Configures the minimum packet size that can
be fragmented
Configures the inactivity time.
Sets the wait time.
Sets the packet size threshold at which an RTS
must be sent to the receiving station prior to the
sending station starting communications
Adjusts the power of the radio signals
transmitted from the access point.
Enables the radio or SSID wireless interfaces. IC-R
Disables the radio or SSID wireless interfaces. IC-R
Shows the status for the wireless interface
Displays parameters for the specified SSID
interface
Displays the specified basic rate for the
interfaces.
Display information about associated wireless
stations.
Displays the supported rates for the interfaces. MC
Mode
Page
IC-R
9-112
IC-R
9-113
IC-R
9-114
IC-R
9-114
IC-R
9-115
9-116
IC-R-
WLAN
9-117
IC-R-
WLAN
MC
9-117
MC
9-118
MC
9-122
MC
9-123
9-124