HP 530 Management Manual page 130

General System Configuration
Enabling System Logging
5-46
Command Syntax
[no] logging <_host >[_port]
show debug
show logging
The following example shows how to set an IP address for the receiving server
using the logging command.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# logging 10.1.0.3
ProCurve Access Point 530(config)#
The following example shows the settings.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# show debug
Debug Logging:
Syslog Relay 10.1.0.3 (port 514)
ProCurve Access Point 530(config)#
CLI Reference Page
9-32
9-33
9-33