End; Exit - HP 530 Management Manual

Syntax
configure [terminal]
• terminal - Allows access to the Global Configuration mode. This is
optional and may be omitted by the user.
Default Setting
N/A
Command Mode
Manager Exec
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)

end

This command sets the current context level to the Manager Exec level.
Syntax

end

Default Setting
N/A
Command Mode
Manager Exec
Example
This example shows how to return to the Manager Exec level from the
Ethernet Interface Configuration mode:
ProCurve Access Point 530(ethernet)# end
ProCurve Access Point 530#

exit

This command sets the current command level to the previous command level.
At the Manager Exec level, this command acts the same as logout.
Command Line Reference
General Commands
9-11