Lens Mode; Document Feeder Tray - Konica Minolta 7085 Instruction Manual

Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
To use the Mixed original mode, see procedure on p. 8-6 to p. 8-7.
1.
Arrange originals in order.
Arrange the mixed size originals as illustrated below.
• Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
• Be sure not to use unsuitable RADF originals. See p. 11-8 for details.
See p. 11-9 for available combinations of mixed originals.
2.
Position mixed originals FACE UP, aligned with the left rear side of the

document feeder tray.

Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
3.
Adjust paper guides.
Positioning Originals (continued)
HINT
To the
To the left
depth
Setting
direction
Reminder!
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size

Lens Mode

Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-3