Konica Minolta 7085 Instruction Manual page 252

Storing an Overlay Image in HDD / Overlaying Image Stored in
9.
Touch to select the desired overlaying image data, then touch OK.
The Stamp/Overlay Selection Screen will be restored.
If the IMAGE DELETE key is displayed on the Overlay Image Selection
Screen, you can delete the stored image and name. Select the image name
using up/down arrow key to scroll, then touch IMAGE DELETE.
10.
Touch OK to return to the Application Selection Screen.
11.
Touch OK to return to the Basic Screen.
The Store mode is automatically selected, and APS and AMS are released.
Set the desired conditions on the Basic Screen.
12.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
13.
Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the platen
glass.
14.
Press [START] to scan.
15.
Repeat steps 13 and 14 for all originals.
16.
Touch STORE to exit the Store mode, then press [START] to print.
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
9-64
HDD (Overlay Memory) (continued)
DETAILS: Image Delete Key on the Overlay Image Selection Screen
HINT
CAUTION