Konica Minolta 7085 Instruction Manual page 88

Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued)
5.
Specify the paper size.
When STD size (special) is highlighted, the popup menu will appear.
Use arrow keys to scroll to the desired size. In this case, both the paper size and type
selected will be indicated on the Basic Screen.
When Non STD size is highlighted, the popup menu will appear.
To set the vertical size, touch the vertical size key to highlight it, then use the keypad
on the popup menu to enter the vertical size, or use arrows to scroll to that number.
To set the horizontal size, touch the horizontal size key to highlight it, then use the
keypad on the popup menu to enter the horizontal size, or use arrows to scroll to that
number.
In this case, the Special indication and paper type selected will be displayed on the
Basic Screen, but the actual size information cannot be displayed.
When Wide paper is highlighted, the Select Size popup menu will appear.
Use arrow keys to scroll to the desired wide size, then specify the precise dimensions
of paper to be used according to the procedure as follows.
3-30