Konica Minolta 7085 Instruction Manual page 220

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
3.
Touch Vertical/Horizontal, then specify the vertical and horizontal
widths of the scanning area.
Use up/down arrow key to enter the width from 10 to 150mm in 1mm increments. Keep
touching the key to increase/decrease the value continuously.
Or, touch ENTER REPEAT WIDTH BY KEYPAD to display the popup menu to enter
the value from the touch screen keypad.
Touch Vert./Horiz. on the popup menu each time to shift it from one to another. Enter
the value, then touch OK to restore the Repeat Mode Selection Screen.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
• Copy mode is automatically set to 1 1. When selecting 1 2 mode,
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9-32
DETAILS
as a magnification ratio.
Platen store mode will function automatically.
HINT