Setting Job During Warm-Up; Lens Mode; Density - Konica Minolta 7255 Instruction Manual

Setting Job During Warm-up

While the copier is warming up after power is turned on, select copy
conditions and start scanning so that the copier may start printing
immediately the copier engine is ready.
1.
Turn on the main power and power switches of the machine.
A few seconds after the Wake-up Screen appears in the LCD touch panel,
seven types of Warm-up Screen display in succession for approx. 5 minutes
(7255) / 6 minutes (7272).
2.
Touch the LCD panel to change the Warm-up Screen to the Basic
Screen.
Check that the message "Ready to copy reserve" is displayed on the Basic
Screen.
3.
Set the desired copying conditions, and enter the print quantity.
See p. 3-6 for details on setting print quantity.
4.
Position original(s) FACE UP in the RADF or FACE DOWN on the
platen glass.
See p. 3-2 to p. 3-5 for details on positioning originals.
5.
Press [START].
The original for the job will be scanned.
HINT
HINT
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size

Lens Mode

Density

1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Mode
Shift Tray
Output Mode
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-7