Konica Minolta 7085 Instruction Manual page 246

Printing Watermark onto Copies (Stamp) (continued)
6.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
7.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-6.
10.
Press [START].
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
9-58
HINT
HINT
CAUTION