Reverse Image - Konica Minolta 7085 Instruction Manual

Inserting Images into Printed Sets (Image Insert) (continued)
3.
Use the control panel keypad to enter the page number.
Touch SET after each entry to move to the next key.
When setting more than 15 locations, touch the arrow key to move to the next page.
To clear an incorrect entry, touch DELETE. The entered page number will be deleted.
See p. 9-20 for detailed example.
Touch Booklet on the Image Insertion No. Setting Screen to use this
function.
4.
When all page number entries are made, touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The STORE key on the Basic Screen appears highlighted to show that the Store mode
is automatically selected.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
7.
Scan the document feeder images:
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not exceeding 100
sheets and load them from the block with the first page.
8.
Press [START].
The originals positioned in the document feeder will be scanned into memory.
9.
Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen glass, then close the document feeder.
PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION.
10.
Press [START].
HINT
OPTION
HINT
Reminder!
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-19