Konica Minolta 7085 Instruction Manual page 208

Inserting Images into Printed Sets (Image Insert) (continued)
11.
Repeat steps 9 and 10 for all originals.
• Memory overflow may occur during scanning. See p. 5-11 to p. 5-12.
• Should memory overflow occur frequently, it is recommended that you
12.
Touch STORE to exit the Store mode.
13.
Press [START].
The copier will start printing when ready for output.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
For example, if insertion locations are [2/2/6], scanned platen images will be
inserted as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first
scanned Image insertion.
The third scanned platen image will be inserted after page 6.
NOTES:
• When a page number is larger than the total original count, a sheet is
• Insertions occur in sequence, even if page numbers are entered out of
• Entering the same page number twice will insert two sheets at that
9-20
HINTS
contact your service representative to extend the memory capacity in
your machine.
CAUTION
DETAILS: Entering Page Numbers
inserted as the last page.
sequence.
location.