Konica Minolta 7085 Instruction Manual page 192

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
1.
Load regular sheets into any tray, and insertion sheets and covers
into each tray source to be designated on the Sheet/Cover Insertion
Screen.
• When using thick paper or tabbed paper for covers or insertions, load
• Be sure that the trays for copy paper, front/back covers, and insertions
2.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
4.
Select the desired cover mode.
Example: Touch FRONT COPY to insert a copied front cover.
5.
Touch CHANGE COVERS TRAY to select the cover sheet tray source.
The tray source for covers currently selected is displayed on the Sheet/Cover Insertion
Screen.
Every touch of the key shifts the selection in the display that includes paper type as
specified in Key Operator mode.
If no insertion is desired, proceed to step 8.
9-4
DETAILS
them in the Multi-sheet bypass tray, unless previously specified and
loaded in any other tray.
have the same paper size loaded.
Reminder!