Konica Minolta 7085 Instruction Manual page 83

Making Double-Sided Copies (1 2, 2 2) (continued)
Selecting TOP BIND will make copies upside down on the reverse side,
while RIGHT&LEFT BIND copies normally.
Touch OK to return to the Basic Screen.
3.
Position original FACE DOWN on the platen glass according to the
original direction specified in step 1.
Be sure to start from the first page.
• See p. 11-8 for paper sizes detectable on the platen glass.
• See p. 3-6 for details on positioning originals.
4.
Touch 1 2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [AUTO RESET] at this point, otherwise the platen mode will
be released to disable the copier from scanning the original placed on the
platen glass.
5.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
DETAILS
Binding mode
1
2
2
HINTS
Reminder!
DETAILS
Copies
3 3
1
2
1 1
2
3 3
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-25