Making Trimmed Booklet (Trimming); M Aking Trimmed Booklet (Trimming) - Konica Minolta 7085 Instruction Manual

Making Trimmed Booklet (Trimming)

The Trimming mode is available only when the TU-108 Trimmer unit option is installed
on the FS-211 Finisher. This function can be used with Fold or Stitch & Fold mode to
make each copied set folded or stapled & folded, trimmed at the edge that opens the
booklet, then output to the Trimmer unit tray.
>>>Specifications for Trimming Mode<<<
❒ Max. number of folded sheets (80 g/m
Fold and Trimming:
Stitch & Fold and Trimming:
❒ Paper size: A3, B4, A4R (60 ~ 90 g/m
❒ Trimmer unit tray capacity:
When the Trimmer unit tray capacity is exceeded, the Finisher and Trimmer unit will
stop operating. Select an appropriate print quantity by referring to the following
capacities.
Approx. 512 sheets max.
Fold and Trimming:
Stitch & Fold and Trimming: 100 sets max. of 2~5-sheet-folded booklet
❒ Incompatible Conditions with Booklet selected: APS, 1 1, 2 1, Sort, Staple-sort,
Group, Rotation sort, Rotation group, Output to Secondary (sub) tray, Trimming,
Punch, Mixed Original, Full Area in Non STD size, Tab Paper, Sheet/Cover
Insertion, Combination, OHP Interleave, Program Job, Non-Image Area Erase,
Reverse Image, Repeat
❒ Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort,
Rotation Group, Output to Secondary (sub) tray, Trimming, Punch, OHP Interleave,
Reverse Image
7-16
Fold and Trimming
2
paper) in both modes:
3 sheets
16 sheets
15 sheets when using thick cover paper
2
paper)
100 sets max. of 3-sheet-folded booklet
(100 x 3 = 300 sheets max.)
(100 x 5 = 500 sheets max.)
50 sets max. of 6~10-sheet-folded booklet
(50 x 10 = 500 sheets max.)
32 sets max. of 11~16-sheet-folded booklet
(32 x 16 = 512 sheets max.)
Stitch & Fold
and Trimming