Konica Minolta 7085 Instruction Manual page 356

• Select STD size to allow the machine to automatically detect the size of paper
loaded in the tray and indicate it on the tray key.
• Select STD size (special) to display the popup menu to show available paper
sizes to be specified. Use arrow keys on the popup menu to select the desired
size.
• Select Non STD size to display the popup menu to enter the paper size by using
arrow keys or touch screen keypad.
• Select Wide size paper to display the popup menu to show available wide paper
sizes to be specified. Use arrow keys on the popup menu to select the desired
wide size, then touch Input size to display the popup menu to enter the paper size
by using arrow keys or touch screen keypad.
Touch Lead edge or Rear edge to select the image starting position.
3 Touch OK on the Paper Type Setting Screen or on the Special Size Setting Screen to
complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-24
[6] Paper Type / Special Size Set (continued)