Konica Minolta 7085 Instruction Manual page 31

1 RADF (Reversing Automatic Document Feeder) automatically feeds multiple
originals one at a time to the platen glass for copying.
2 Work table provides a convenient workspace for documents both before and after
copying.
3 Multi-sheet bypass tray used for small quantity copying onto plain paper or
special paper.
4 LCT (Large Capacity Tray LT-402/LT-412) (option) holds 4,000 sheets.
5 Right side door opens to allow removal of mishandled paper.
6 Tray 3 (universal tray) is user-adjustable and holds 1,000 sheets.
7 Tray 2 (universal tray) is user-adjustable and holds 500 sheets.
8 Tray 1 (universal tray) is user-adjustable and holds 500 sheets.
9 Left side door opens together with the front door to allow removal of mishandled
paper.
10 Front door opens to allow removal of mishandled paper.
11 PU-108 Punching unit (option) punches file holes in the output copies.
PZ-108 Punching / Z-Folding unit (option) punches file holes and/or Z-folds the
output copies.
12 FS-111/FS-211 Finisher (option) sorts, staple-sorts, and groups copies into
finished sets.
FS-211 also folds or staples & folds copies into booklet-styled sets.
13 TU-108 Trimmer unit (option) trims the end of booklet.
14 PI-108 Cover sheet feeder (option) loads cover sheet paper and feeds the sheet
as cover.
15 Power switch turns copier power On/Off when pressed.
16 LCD Touch screen displays interactive operation screens.
17 Control panel controls copier operations and displays messages as required.
Machine Configuration (continued)
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
2-3