Setting E.k.c. Function (Environment Setup); S Etting E.k.c. Function (Environment Setup) - Konica Minolta 7085 Instruction Manual

Setting E.K.C. Function (Environment Setup)

Perform the following Key Operator settings concerning the E.K.C. function using the
web browser on a PC.
• E.K.C. Data Add (see step 4.)
Add a new E.K.C. data (password, name, and copy limit) to the E.K.C. list.
• E.K.C. Data List (see step 5.)
Change or delete the E.K.C. data (password, name, or copy limit) in the list, or reset
the counters.
• E.K.C. Function Setting (see step 6.)
Specify the following E.K.C. function settings.
Switching the E.K.C.: ON/OFF
Effect when the copy limit is reached: Immediately / After job / Warning
E.K.C. password: 8 digits / under 8 digits
E.K.C. password input timing: Auto reset timer/ Complete job
Wrong E.K.C. password (from printer): Accept / Reject
The above settings can also be performed on the machine itself, except for
the Wrong E.K.C. password (from printer) setting. Some setting may require
operations on the machine.
Refer to pages 13-15 and 13-39 to 13-44.
1.
Open the Web Utilities window.
See p. 10-25 for detailed procedure to access the Web Utilities.
2.
Click on [Environment Setup].
3.
Display the E.K.C. Function Setting window.
Enter the 4-digit Key Operator password, then click on [Apply].
DETAILS
HINT
Server
Functions
Image
Store/Delete
Image
Store&Output
Image Recall
Image Edit
To Use Web
Utilities
Machine
Information
Job Status
HDD Job
Information
Environment
Setup
10
Network
Function
10-35