Konica Minolta 7085 Instruction Manual page 157

Punching File Holes in Copies (Punch) (continued)
Touch to select the desired original set direction, then touch OK to return to the Basic
Screen.
8.
Select additional copying features, as required.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
10.
Position originals in the document feeder.
See p. 3-2 to p. 3-5 for details on positioning originals.
11.
Press [START].
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
HINT
HINT
CAUTION
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Fold /
Stitch&Fold
Punch
Z-Fold
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-13