Reversing Colour In Black And White Image (Reverse Image); R Eversing Colour In Black And White Image (Reverse Image) - Konica Minolta 7085 Instruction Manual

Reversing Colour in Black and White Image (Reverse Image)

Use Reverse image to reverse the image from black-on-white to white-on-black, and
vice versa. This is very good for copying white-on-black originals and reversing them to
fax.
>>>Specifications for Reverse Image<<<
❒ Incompatible Conditions: Fold, Stitch & Fold, Trimming, Non-Image Area Erase, Repeat,
Full-Image Area, Stamp, Overlay
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Reverse Image on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
4.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
Original
Reminder!
HINT
Reverse Image copying
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-29